Maintaining Your Swimming Pool Before it Rains

Whether you are preparing for or recovering from a rainy season, pool maintenance is necessary to ensure the health and quality of your pool water and equipment. To ensure your pool is ready for swimming as soon as the sun returns, here are some tips to maintain your pool when it inevitably rains.

What Does Rain Do to Your Pool Water?
Acidic rainwater can lower your pool’s pH and cause water chemistry problems. Acute irritation from rainwater, as well as acidic pool water causing eye and skin irritation, can cause your sanitizing and disinfecting measures to become ineffective.
The most dangerous aspect of heavy rain is that the acidic, nitrogen-rich water provides ideal breeding conditions for algae. The pool is not resistant to unwanted germs and pollutants. No one wants to see green water on their steps, floors, or walls after a surprise visit from Mother Nature.

Tips on Maintaining a Pool Before it Rains
When the weather forecast calls for lots of rain, take these preventative measures to keep your pool water clean and safe:
To keep water chemistry in balance, change the pH and alkalinity of the water.
Shock your pool water and increase chlorine levels by 1 – 2 ppm above what is usually recommended or required.
Remember that preventing algae is critical to keeping your pool surfaces clean. Therefore, keep an algaecide in the water to control any algae infestation.

Brush the surfaces of your pool. Regularly brushing the walls and bottom of your pool can help remove small algae particles so they can enter the filter.

Always follow the instructions for cleaning your pool filter. Clean your pool filter according to the manufacturer’s instructions as each filter may differ according to the brand.
Throw on a pool cover. Automatic or manual cover functions to protect the water from contamination by rain.
Overflow – continuous heavy rain can overflow the pool water. It is best to drain the excess until levels are normal.
Debris – rainfalls bring debris. Remove all, including leaves and insects. An automatic vacuum is excellent for cleaning the sides and bottom of a pool. It helps to prevent dirt from nesting any fungi growth and organisms.
Skimmer Check – always check skimmers after rainfall; ensure to clean them thoroughly since they can accumulate debris.
Algae Growth – avoid algae growth by turning on the filter system, helping to circulate water and preventing algae-spore development and growth. According to experts, it is important to let the filter system run for approximately ten hours after rainfall.

pH and Chlorine levels – rainfalls can affect pH and chlorine levels. Test the water after rainfall and use the necessary chemicals to normalize the pool water.
Contact your local pool service provider if your pool still needs help after heavy rains. Your pool service expert can help you with additional difficulties, such as equipment failure and flood cleanup in low-lying areas.
Our dedicated team at Silverline Pools is here for you. We can answer all your questions and help you find the best options available. Contact us today at (865 ) 966-8419 or through our website for a free qoute.

Salt water vs clorine Pools

Saltwater vs Chlorine Pools

Knowing the benefits and drawbacks of saltwater and chlorinated pools is crucial when installing a new pool or remodelling an existing one.

Pools with Saltwater

As more individuals become aware of the advantages saltwater pools provide, their popularity is rising. However, the biggest misconception about saltwater pools is that they do not need chlorine since salt is used to disinfect the water. Instead, it is cleaned with a salt-chlorine generator.

Running the saltwater through the generator causes the salt and water to separate into hydrogen and hypochlorous acid. To disinfect the water, the acid takes the place of the chlorine product.

Pros:

Saltwater pools are a little less harmful to anyone with sensitive skin, eyes, or hair as opposed to chlorine pools. Because chlorine cannot be touched physically, which could be dangerous for pool owners if improperly handled or stored, it is safer. Additionally, compared to chlorinated water, saltwater is gentler and softer.

Cons:

The system costs more money. Since saltwater is corrosive, it can damage pipes, tile, coping, handrails, ladders, etc. This means that in the area surrounding your pool deck, a salt-friendly material is required. Salt is also harder to control as it creates extremely high pH values (the pH balance is important in maintaining water clarity). This means the systems for saltwater pools are more complicated and more likely to have essential components go wrong leading to additional maintenance costs.

Chlorine Pools

The chlorine pool has been the most popular and prevalent method for a long time and employs the right amount of chlorine to combat bacteria in pool water. As the compounds breakdown, bacteria and algae are killed or prevented.

Pros:

Pools with chlorine are essentially more economical. They are known to be much simpler to use. All you need is to simply purchase chlorine tablets and frequently place them in the chlorinator. The chlorine will clean the pool water, eradicate bacteria, and suppress the formation of algae.

Additionally, pools with chlorine require less power. To produce chlorine from salt, special equipment is needed for saltwater pools driving up your operating cost.

Cons:

Chlorine levels that are too high can be harsh on delicate skin, eyes, and hair. This also aids the consistent addition of other chemicals, such as balancing agents, to be required.

Additionally, you need to store chlorine appropriately. For the purpose of keeping components active, you might need to designate a special, dry space.

Overall Recommendation

Some elements will always guide a homeowner’s decision in choosing the ideal pool for their requirements, such as:

Price
Operating and Maintenance Costs
Pool Environmental Standards
Features of Pool

A homeowner should be able to make an informed decision about whether to have a chlorine or saltwater pool by weighing the benefits and drawbacks of each. Regular water testing is probably necessary whether you choose a saltwater pool or a chlorine pool. You can test and modify chlorine levels more easily by using pH and ORP sensors.

Compared to saltwater systems, which rely on a complicated chlorine generator and are simpler to maintain, chlorine systems are more straightforward to utilize. Chlorine does not seriously harm pool components, unlike saltwater systems, which over time cause corrosion to metal.

You can change your swimming pool with the assistance of our team of professionals. For a free quote, contact us at (865) 966-8419 or go to our website.

Add to cart